Universal Tensile Testing Machines – UTM Series
Hydraulic and electromechanical universal testing machines for tensile, compression, bending and flexure tests. From 0.1 kN to 2,000 kN. Designed and manufactured in Italy since 1983.
Tensile Testing Machines for Every Material and Application
A complete range of universal testing machines covering metals, plastics, composites, rubber, geogrids and construction materials.
The Cermac UTM Series is a comprehensive range of universal tensile testing machines designed to perform tensile, compression, bending and flexure tests on virtually any material. All systems are fully computerised, servo-controlled and provide closed-loop control of load, displacement and strain with 24-bit digital resolution and sampling rates up to 1 kHz.
Available in hydraulic and electromechanical configurations with load capacities from 0.1 kN to 2,000 kN, the UTM series covers the broadest spectrum of testing requirements — from thin plastic films and adhesives to high-strength steel and rebar.
Every Cermac tensile testing machine is designed, assembled and calibrated at our facility near Milan, Italy, and is backed by ISO 9001:2015 certified quality management. Our in-house engineering team develops all core components — structural frame, digital controller, firmware and testing software — ensuring fast, direct technical support worldwide.
Three Series to Match Your Testing Requirements
From bench-top models for R&D to heavy-duty hydraulic systems for production QC.
Servo-hydraulic universal testing machines with four-column high-rigidity frame for high-strength materials. Ideal for steel mills, rebar testing and heavy industry.
- Servo-controlled hydraulic actuator
- Speed range: 0.1 – 100 mm/min
- Accuracy: Class 1 (ISO 7500)
- Models: 600 kN, 1,000 kN, 2,000 kN
Ball-screw electromechanical machines with brushless motor. Oil-free, low maintenance and silent. Perfect for QC labs, R&D, composites and high-temperature testing.
- Ball screw drive, oil-free operation
- Speed range: 0.001 – 500 mm/min
- Accuracy: Class 0.5 (ISO 7500)
- Models: 50, 100, 200, 300, 400, 600 kN
Compact single and dual-column bench-top testing machines for plastics, rubber, adhesives, films and flexible materials. Ideal for universities, R&D and QC on non-metallic materials.
- Single or dual column frame
- Speed range: 0.001 – 500 mm/min
- Accuracy: Class 0.5 (ISO 7500)
- Models: 0.1, 1, 5, 10, 20 kN
Key Features Across All UTM Series
Precision, flexibility and connectivity designed for the modern testing laboratory.
24-bit Digital Control
Proprietary electronic controller with 24-bit ADC resolution and up to 1 kHz sampling rate. Real-time closed-loop control of load, displacement and strain for accurate, repeatable results.
Cermac Testing Software
Intuitive test setup through customisable masks, real-time data plotting, centralised database with multi-user network access. Export functions and report generation for official certifications.
Industry 4.0 Ready
TCP/IP LAN connectivity, automatic data loading, network-shared database and result export in full compliance with Industry 4.0 smart factory requirements.
Quick-Change Tooling
Plug-in accessory system for fast changeover between grips, bending fixtures and compression platens. Minimises downtime in multi-material laboratories.
High-Temperature Testing
Integration with controlled-atmosphere electric furnaces and ceramic extensometer arms for tensile tests at elevated temperatures. Multi-station furnace option available.
Bellows-Protected Drive
On electromechanical models, protective bellows shield the ball screw and moving parts from dust and contaminants, ensuring long service life and clean operation.
Technical Specifications
Detailed specifications for each series and model.
| Specification | UTM600H | UTM1000H | UTM2000H |
|---|---|---|---|
| Load capacity | 600 kN | 1,000 kN | 2,000 kN |
| Accuracy | Class 1 (or better) from 1% FS — ISO 7500 | ||
| Crosshead speed | 0.1 – 100 mm/min | ||
| Actuator stroke | 580 mm | 680 mm | 800 mm |
| Max. vertical clearance | 600 mm | 700 mm | 800 mm |
| Test area width | 480 mm | 660 mm | 800 mm |
| Frame dimensions | 880×630×3000 mm | 1000×800×3500 mm | 1220×900×4000 mm |
| Frame weight | 3,200 kg | 5,000 kg | 8,500 kg |
| Power supply | 7 kW — 400 VAC / 50 Hz / 3-phase | ||
| Digital resolution | 24-bit ADC / 1 kHz | ||
| Specification | UTM50E | UTM100E | UTM200E | UTM300E | UTM400E | UTM600E |
|---|---|---|---|---|---|---|
| Load capacity | 50 kN | 100 kN | 200 kN | 300 kN | 400 kN | 600 kN |
| Accuracy | Class 0.5 from 1% FS — ISO 7500 | |||||
| Crosshead speed | 0.001 – 500 mm/min | 0.01 – 200 mm/min | ||||
| Crosshead stroke | 600 mm | 600 mm | 550 mm | 550 mm | 620 mm | 600 mm |
| Frame weight | 1,100 kg | 1,100 kg | 1,700 kg | 1,850 kg | 2,100 kg | 5,000 kg |
| Digital resolution | 24-bit ADC / 1 kHz | |||||
| Specification | UTM 0.1D – 5D | UTM 5D – 20D |
|---|---|---|
| Frame type | Single column | Dual column |
| Load capacity | 0.1 – 5 kN | 5 – 20 kN |
| Accuracy | Class 0.5 from 1% FS — ISO 7500 | |
| Crosshead speed | 0.001 – 500 mm/min | |
| Crosshead stroke | 600 mm | 1,140 mm |
| Frame weight | 120 kg | 370 kg |
| Power supply | 230 VAC / 50 Hz / Single phase | |
| Digital resolution | 24-bit ADC / 1 kHz | |
Applicable Testing Standards
Our universal testing machines are designed to comply with all major international material testing standards.
Standard Test Methods for Tension Testing of Metallic Materials.
Metallic materials — Tensile testing — Part 1: Method of test at room temperature.
Standard Test Methods and Definitions for Mechanical Testing of Steel Products.
Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement.
Tensile testing of plastics — Determination of tensile properties of rigid and semi-rigid plastics.
Plastics and composites — Determination of flexural properties by three-point bending.
Steel for the reinforcement and prestressing of concrete — Test methods and requirements.
Rubber, vulcanised or thermoplastic — Determination of tensile stress-strain properties.
Applications
Trusted across industries where mechanical properties determine safety, quality and performance.
-
Steel and metals industry — tensile testing of steel, cast iron, aluminium alloys, copper and high-strength metals for quality control, production acceptance and certification to ASTM E8 and ISO 6892.
-
Construction materials — testing rebar, reinforcement mesh, prestressing strands and concrete specimens according to EN 15630, EN 10080 and ASTM A615.
-
Plastics and polymers — tensile, compression and flexure testing of rigid plastics, films, elastomers and rubber per ISO 527, ASTM D638, ISO 37 and ASTM D412.
-
Composites and advanced materials — testing carbon fibre, glass fibre, FRP, FRCM and geogrid reinforcement systems with dedicated gripping solutions for flat, textile and mesh specimens.
-
Fasteners and hardware — tensile, shear and proof load testing of bolts, screws and nuts according to ISO 898-1, ASTM F606 and related standards.
-
Adhesives and bonding — peel, lap-shear and bond strength testing per ISO 4587, ASTM D1002, ASTM D3167 and EN 1464.
-
Research and academia — material characterisation, fracture mechanics, high-temperature testing and new material development at universities and R&D centres.
Accessories & Measurement Systems
A complete ecosystem of grips, extensometers and fixtures for every test type.
Hydraulic & Pneumatic Grips
Self-aligning wedge grips for metals, composites and plastics with quick specimen loading.
Clip-on Extensometers
High-precision strain measurement with MFA2 (up to 0.1 µm resolution) and TOM-I models for yield point and elastic modulus determination.
Video Extensometer
Non-contact optical strain measurement, ISO 9513 compliant, suitable for room and high-temperature testing. Models from 1.3 to 16.1 MPx.
High-Temperature Furnaces
Controlled-atmosphere electric furnaces with ceramic arms. Multi-station configurations for reduced preheating time.
Bending & Compression Fixtures
Three-point and four-point bending jigs, compression platens and special fixtures for specific test standards.
Fastener Testing Kit
Complete kit for tensile, shear and proof load testing of bolts M10–M30, compliant with ISO 898-1 and ASTM F606.
Geogrid & Textile Grips
Special modular grips for flat, textile and mesh specimens — FRP, FRCM, geogrids and technical fibres.
Specimen Marking Machine
SP500 gauge length marker for quick and precise Lo marking on tensile specimens up to 500 mm.
Why Choose Cermac Tensile Testing Machines
Since 1983, Cermac S.r.l. has evolved from an artisan workshop into a recognised leader in the material testing equipment industry. Today, major laboratories and industrial groups across Europe and worldwide rely on Cermac machines for their testing operations.
Our competitive advantage lies in the in-house development of all core components — frame, electronics, firmware and software. This means faster support, shorter lead times for spare parts, and the ability to customise machines to your specific requirements without relying on third-party suppliers.
Every machine ships with the Cermac Testing software platform, providing an intuitive interface, centralised data management and full Industry 4.0 compliance. Our comprehensive range of accessories — from clip-on extensometers and video extensometers to high-temperature furnaces and special grips — means you can equip your laboratory from a single source.
Frequently Asked Questions
What is a tensile testing machine used for?
A tensile testing machine (also called a universal testing machine or UTM) is used to determine the mechanical properties of materials by applying controlled tensile, compressive, bending or flexure forces. It measures parameters such as tensile strength, yield strength, elastic modulus and elongation at break, and is essential for quality control, material acceptance and R&D across metals, plastics, composites and construction materials.
What is the difference between hydraulic and electromechanical tensile testing machines?
Hydraulic machines (UTM-H series) use a servo-controlled hydraulic actuator and are designed for high-force applications up to 2,000 kN, ideal for testing steel, rebar and high-strength metals. Electromechanical machines (UTM-E series) use ball screw drives powered by brushless motors, offering oil-free operation, lower maintenance, quieter performance and precise speed control — ideal for R&D laboratories, plastics and composites testing.
What testing standards do Cermac machines comply with?
Cermac universal testing machines comply with major international standards including ASTM E8, ASTM A370, ASTM A615, ASTM D638, ISO 6892, ISO 527, ISO 178, ISO 604, EN 15630 and EN 10080, covering metals, plastics, composites and construction materials.
What load capacity range is available?
Cermac offers universal testing machines from 0.1 kN (bench-top UTM-D series) to 2,000 kN (floor-standing UTM-H hydraulic series), with the electromechanical UTM-E series covering the 50 kN to 600 kN mid-range. This spans virtually every material testing requirement.
Can Cermac machines perform high-temperature tensile tests?
Yes. The UTM-E series can be integrated with controlled-atmosphere electric furnaces for tensile testing at elevated temperatures, with ceramic extensometer arms for accurate strain measurement. Multi-station furnace configurations are also available to reduce specimen preheating time.
Are Cermac tensile testing machines Industry 4.0 compatible?
Yes. All Cermac machines connect via TCP/IP LAN to the Cermac Testing software platform, enabling centralised data acquisition, multi-user network access, automatic report generation and full data traceability in compliance with Industry 4.0 requirements.
Machines & Accessories in Action
Cermac testing machines and accessories configured for real laboratory applications.
Tailored to Your Laboratory
At Cermac, every testing machine can be fully customised to match your specific requirements. From frame configuration and load capacity to grips, fixtures and software interfaces — we design the complete system around your laboratory’s workflow, materials and testing standards.
Our engineering team works directly with you to identify the optimal solution: the right machine, the right accessories and the right configuration to maximise productivity and ensure compliance from day one.
Every Cermac machine is compatible with a comprehensive range of dedicated testing accessories — extensometers, grips, furnaces, bending fixtures, impact accessories and more. Explore the full accessories catalogue →
Request a Quote for Cermac Tensile Testing Machines
Tell us about your testing requirements and our engineering team will get back to you within 24 business hours with a tailored proposal.