Universal Testing Machine - UTM-H Series -

Testing machines suitable for high strength materials

Universal testing machine, computerized, servo controlled, suitable to perform tensile, compression, bending tests on high strength samples.

Hydraulic operation, double acting actuator controlled by high performance servovalve.
Low noise hydraulic unit, free positioning.
TestingXE control electronics.
24 bit ADC converter and control loop up to 1 kHz.
Front opening jaw group at ergonomic height for practical use.
Simplified jaws change with front insertion.
Dedicated jaws for tests on strands.
Full protection with active door lock.
Can be used with any clip-on, to failure or video extensometer.
Available loads 600 kN, 1000 kN, 2000 kN

It is the ideal machine for round bars and rebar steel testing.

Models	UTM600H	UTM1000H	UTM2000H
Load capacity	600 kN	1000 kN	2000 kN
Accuracy	Class 1 ( or better) from 1 % of full scale ISO-7500
Moving speed	from 0.1 to 100 mm/min
Stroke of the actuator	580 mm	650 mm	620 mm
Vertical test area space	780 mm	850 mm	820 mm
Test area width	480 mm	550 mm	500 mm
Frame dimensions	850 x 850 x 3500 mm	1050 x 1050 x 3500 mm	1200 x 1200 x 3700 mm
Hydraulic pack dimensions	680 x 1100 x 930 mm
Weight of the frame	3000 kg	4500 kg	8500 kg
Weight of the hydraulic pack	400 kg	400 kg	400 kg
Power supply	6 kW 400 VAC / 50 Hz / 3 phases (5 poles)
ADC Converter	24 bit / 1 kHz

Steel tensile test	ISO 6892-1, ASTM E8, ASTM A370, ISO 15630
Test on structural products	ISO 15630-1, ISO 15630-2, ISO 15630-3
Alloy steel products	ASTM B348, ASTM B557
Test on Welded Components	ISO 4136, ISO 5178, ISO 5173
Test on forged and heat products	ISO 3266, EN 818-X, EN 1677-X
Bend test	ISO 7438, ISO 5173, ASTM E190, ASTM E290