Universal Testing Machine - UTM-H Series

Specific testing machines for high strength materials

Universal testing machine, computerized, servo controlled, usable to perform tensile, compression, bending tests on high strength samples.

Hydraulic operation, double acting actuator piloted by high performance servovalve.
Low noise hydraulic unit, free positioning.
TestingXE control electronics.
24-bit ADC converter and control loop up to 1 Khz.
Front opening jaw group and ergonomic height for practical use.
Simplified terminal change with front insertion.
Dedicated clamps for tests on strands.
Full protection with active door lock.
Can be used with any clip-on, breakout or video strain gauge.
Available loads 600kN, 1000kN, 2000kN

It is the ideal machine for testing on round bars and rebar steel.

Models	UTM600H	UTM1000H	UTM2000H
Maximum load capacity	600 kN	1000 kN	2000 kN
Precision	Class 0.5 from 2 % of full-scale ISO-7500
Travel Speed	da 0.5 a 100 mm/min / from 0,02 to 3,94 inch/min
Maximum pitch of the movable beam	650 mm / 25,59 inch	650 mm / 25,59 inch	650 mm / 25,59 inch
Vertical light maximum test area	850 mm / 33,46 inch	850 mm / 33,46 inch	850 mm / 33,46 inch
Text area width	450 mm / 17,72 inch	650mm / 25,59 inch	650 mm / 25,59 inch
Overall size frame	1050 x 1050 x h3250 mm 41,34 x 41,34 x 127,95 inch	1150 x 1150 x h3400 mm 45,28 x 45,28 x 133,86 inch	1150 x 1150 x h3400 mm 45,28 x 45,28 x 133,86 inch
Frame weight	3200 Kg	4500 Kg	8500 Kg
Alimentation	5.5KW 400 VAC / 50 Hz / 3 Phases (5 poles)
Digital Resolution	24 bit / 1 Khz Converter

Steel tensile test	ISO 6892-1, ASTM E8, ASTM A370, ISO 15630
Test on structural products	ISO 15630-1, ISO 15630-2, ISO 15630-3
Alloy steel products	ASTM B348, ASTM B557
Test on Welded Components	ISO 4136, ISO 5178, ISO 5173
Test on forged and heat products	ISO 3266, EN 818-X, EN 1677-X
Bend test	ISO 7438, ISO 5173, ASTM E190, ASTM E290